混合控制下腐蚀过程的电化学动力学参数测定

通过恒电量脉冲技术测定Q235碳钢在天然海水中腐蚀过程的电化学动力学参数. 分别利用不同极化幅度的恒电量瞬态响应分析获得极化电阻和Tafel斜率, 进而计算腐蚀电流icorr. 并对比了恒电量方法和考虑扩散影响的稳态极化曲线方法的测量结果. 结果表明, 采用恒电量强极化积分算法(CPSI)获得的Tafel斜率与极化曲线方法有很好的相关性. 同时, CPSI测定的阴极Tafel斜率符合氧还原反应的理论Tafel斜率值. 因此, 采用恒电量瞬态响应测量大大减小了浓差极化的影响, 有利于快速测定电荷传递和扩散传质混合控制下腐蚀过程的电化学动力学参数.     

The polynomial reconstruction problem: The first 50 years

The problem of reconstructing the characteristic polynomial of a graph of order at least 3 from the collection of characteristic polynomials of its vertex-deleted subgraphs was posed by Cvetkovi? in 1973 as a spectral counter part to the well-known Ulam's reconstruction conjecture. Over the last 50 years, this problem has received notable attention, many positive results have been obtained, but in the general case the problem is still unresolved. In particular, no counter example is found in literature. In this expository paper we survey classical and some more recent results concerning the polynomial reconstruction problem, discuss some related problems, variations and generalizations.     

Electrochemical Characterization of Stainless Steel as a New Electrode Material in a Medical Device for the Diagnosis of Sudomotor Dysfunction

An electrochemical sensor detects the risk of diabetes and prediabetes; low potentials are applied to nickel electrodes and electrical responses are measured. Although the contact of nickel with skin is short, the risk of allergical reactions cannot be discarded. SS 304L, with lower Ni content, was tested in carbonate buffer solutions containing chloride, lactate and urea to investigate its sensitivity to different parameters in sweat and compare it to nickel. The results show that SS 304L is a suitable material for the assessment of sudomotor dysfunction due to its high capacity to detect the deviation in Cl^? concentration. Sensitivity of SS 304L to Cl^? is much higher than for nickel.     

Supramolecular lead(II) azide complex of 2,6-diacetylpyridine dihydrazone: synthesis,molecular structure,and biological activity

The complex of 2,6-diacetylpyridinedihydrazone (L) with lead(II) and azide has been characterized by elemental analyses, FTIR, and single-crystal X-ray analysis. The Pb(C₉H₁₃N₁₁) (1) crystallized in the monoclinic space group C2/c. The coordination of 1 exhibits a gap around the lead(II), possibly occupied by a stereochemically active electron lone pair on lead(II) resulting in a hemidirected complex. Antimicrobial activity of the complex is higher than the free ligand.     

Polymer complexes. LXXVI. Synthesis,characterization, CT‐DNA binding,molecular docking and thermal studies of sulfoxine polymer complexes

Novel polymer complexes of 8‐hydroxyquinoline‐5‐sulfonic acid hydrate ( H ₂ L ) with Cu²⁺, Co²⁺ and Ni²⁺ chloride were prepared and characterized. Microanalysis, magnetic susceptibility, IR spectra, electron spin resonance, mass spectra, X‐ray, molar conductance, thermal, and UV–Vis spectra studies have been used to confirm the structure of the prepared polymer complexes. The molecular and electronic structures of the hydrogen bond conformers for ligand ( H ₂ L ) were optimized theoretically and the quantum chemical parameters were calculated. On the basis of elemental and IR data, the chemical structure of metal chelates commensurate that the tri‐dentate (H₂L) coordinate to metal chlorides through oxygen atom of phenolic OH and oxygen atom of SO₃‐H group by replacing H atoms and nitrogen of the quinoline ring. The magnetic studies suggested the octahedral geometrical structure for all produced polymer complexes with general formula {[ML (OH₂)₃] .xH₂O}_n (M = Cu²⁺, x = 1.; Co²⁺, x = 2 and Ni²⁺, x = 2) in molar ratio (1:1). Coats–Redfern and Horowitz–Metzger methods have been used for calculating the activation thermodynamic parameters of the thermal decomposition for H ₂ L and its polymer complexes. The interaction between H ₂ L and its transition metal complexes with the calf thymus DNA (CT‐DNA) was determined by UV–Vis spectra. Binding efficiency between H ₂ L with the receptors of the prostate cancer (PDB code 2Q7L Hormone) and the breast cancer (PDB code 1JNX Gene regulation) was studied by molecular docking. The inhibition behaviour of H ₂ L against the corrosion of carbon steel / HCl (2 M) solution was studied by weight loss, Tafel polarisation, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The adsorption isotherm was found to be Friendlish isotherm. The morphology of inhibited carbon steel? s surface was studied using scanning electron microscope (SEM) and energy dispersive X‐ray spectroscopy (EDS).     

RAFM钢TIG焊和电子束焊疲劳性能实验和分析模拟

利用ANSYS 对低活化铁素体马氏体(RAFM)钢进行非熔化极气体保护焊(TIG 焊)与电子束焊的抗疲劳模拟分析，再利用SDS200 电液伺服疲劳试验机对TIG 焊和电子束焊的两种RAFM 钢试件进行实验。通过施加相同梯度负荷对TIG 焊和电子束焊试件进行焊缝的疲劳性能实验。与实验结果对比分析，结果显示电子束焊优于 TIG 焊，但在一定负载下可以用TIG 焊代替电子束焊。     

板结构计算模型的新发展

现代复合材料层合板具有高强和轻型的突出优点，从而在军工和民用等诸多领域发挥着重要作用。这种板结构的特点是随着纤维走向的不同，层间材料的物理-力学特性发生剧烈变化。沿板厚方向变形的梯度比较陡峭，并在层间结合面处发生强不连续，呈现zig-zag （锯齿状）现象。这导致横向剪应变在板的静态和动态响应中发生重要作用，不计横向变形的经典组合板计算模型CLPT难以适应现代多层板计算分析的需要。考虑横向剪切变形影响的板的计算模型得到重视和发展。需要指出，现有各种考虑剪切变形影响的计算模型虽然有了很大的发展，但在全面和准确性上仍然存在一定的不足，难以适应现代多层组合板横向力和物理性能多变的情况。模型预测的沿板厚方向位移和应力的变化规律难以通过严格的检验。本文提出的以比例边界有限元为基础的正交各向异性板的数值计算模型，同时可适用于各种薄板与厚板的分析，对现代复合材料层合板的分析具有特殊的优越性。所得到的板的位移、正应力和剪应力沿板厚方向的变化，与三维弹性理论的标准解高度吻合。数值算例进一步表明，随着层间纤维走向的变化，板内位移场和应力场沿板厚方向剧烈变化所呈现的锯齿现象均可以精准地进行模拟。据此，本文建议方法对现代板分析的广泛适应性和高度准确性得到了充分论证。     

高速铁路连续梁桥的共振响应与振动控制研究

以液体粘滞阻尼器为振动控制外部装置，主桥采用欧拉伯努利梁，通过中国和谐号动车组CRH380AL、日本新干线Shinkansen700和欧洲高速列车HSLMA8三种不同类型的高速列车对比，模拟分析了高速列车作用下桥梁结构共振响应的影响因素，以及粘滞阻尼器的阻尼系数与安装位置对桥梁结构振动响应的减振效果。研究结果表明，（1）合理有效地布置列车荷载轴距，可使桥梁结构发生基频共振的列车时速在运营时速之外，避免了桥梁结构发生较大振动峰值响应，即桥梁结构的基频共振；（2）随着粘滞阻尼器阻尼系数的增大，桥梁的加速度峰值在列车不同时速下均在减少，对桥梁振动有着不同程度的减振效果；（3）通过合理安置液体粘滞阻尼器，可有效降低高速列车作用下桥梁结构的共振响应；（4）随着粘滞阻尼器与主梁的连接点位置逐渐远离支座，粘滞阻尼器的减振效果逐渐明显；（5）随着粘滞阻尼器与桥台的连接点位置逐渐靠近支座，粘滞阻尼器的减振效果略有提升，但不明显。     

Dislocation-density-based constitutive modelling of tensile flow and work-hardening behaviour of P92 steel

The flow and work-hardening behaviour of tempered martensitic P92 steel have been investigated using phenomenological constitutive model in the temperature range 300–873 K for the strain rates ranging from 3.16 × 10^?5 to 1.26 × 10^?3 s^?1. The analysis indicated that the hybrid model reduced to Estrin–Mecking (E–M) one-internal-variable model at intermediate and high temperatures. Further, the analysis also indicated that dislocation dense martensite lath/cell boundaries and precipitates together act as effective barriers to dislocation glide in P92 steel. The flow behaviour of the steel was adequately described by the E–M approach for the range of temperatures and strain rates examined. Three distinct temperature regimes have been obtained for the variations in work-hardening parameters with respect to temperature and strain rate. Signatures of dynamic strain ageing in terms of the anomalous variations in work-hardening parameters at intermediate temperatures and the dominance of dynamic recovery at high temperatures have been observed. The evaluation of activation energy suggested that deformation is controlled by the dominance of cross-slip of dislocations at room and intermediate temperatures, and climb of dislocations at high temperatures.     

Modeling and numerical simulation of the resistance spot welding of zinc coated steel sheets using rounded tip electrode: Analysis of required conditions

This paper investigates the essential conditions to improve the accuracy of a resistance spot welding computational study of advanced zinc coated steel sheets using rounded tip electrode. An experimental analysis is performed to highlight the required considerations for a suitable simulation. A sequential Electrical-Thermal-Metallurgical and Mechanical (ETMM) finite element analysis with appropriate precautions of the contact conditions enables to accurately simulate the nugget development during the welding. A critical smooth evolution of the contact radius is required. A fine meshing with an interfacial mesh size of at least 0.05 × 10⁻³ m combined with a coupling time step of 0.0025 s between the electrical-thermal-metallurgical and the mechanical analysis allows a regular incrementation of the contact radius, without burdening the time computing. Accurate values of the contact resistance depending on the interfacial pressure and temperature are essential for a good simulation of the nugget size. The ETMM calculation is successfully extended to the simulation of the welding of a typical two sheets assembly.